What is the default IP address for Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway)?

The factory default IP address for Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway) is http://192.168.0.1.

What is the default username and password for Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway)?

The default username is "admin" and the default password is "admin".

How do I factory reset the Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway)?

Locate the small Reset pinhole on the back panel of the Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Actiontec Modem Gateway Wi-Fi 4 (802.11n) N150 ADSL2+

Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway)

Verizon DSL and CenturyLink legacy wireless DSL gateway

Open http://192.168.0.1 ↗

Illustration, not a product photo

Gateway IP

192.168.0.1

Factory Username

admin

Factory Password

admin

Technical specifications

Actiontec Modem Gateway

Manufacturer	Actiontec
Product Series	Actiontec Modem Gateway
Device Class / Category	Modem Gateway
Wireless Standard	Wi-Fi 4 (802.11n)
Speed Rating	N150 ADSL2+
Ethernet & Fiber Ports	1x RJ11 DSL, 4x 100M LAN
Routing / Firewall Throughput	N150 ADSL2+ Capacity
Default Gateway URL	http://192.168.0.1 ↗
Operating System / Firmware	Actiontec Firmware

How to log in to your Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway)

1 Connect Your Device: Plug your PC into any LAN port on the Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.0.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Actiontec models

GT701D (Single Port ADSL2+ Ethernet Modem Router)

Modem Gateway 192.168.0.1

Actiontec MI424WR Rev I Gigabit MoCA Wireless-N Router

Modem Gateway 192.168.1.1

Actiontec T3200M Dual-Band Bonded VDSL2 Gigabit Gateway

Modem Gateway 192.168.1.254

Actiontec GT784WN Wireless-N ADSL2+ Modem Router

Modem Gateway 192.168.0.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway)?

The default IP address is http://192.168.0.1, default username is "admin", and default password is "admin".

What ports and speeds does Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway) support?

The Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway) is equipped with 1x RJ11 DSL, 4x 100M LAN with an overall speed rating of N150 ADSL2+.

How do I reset my Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway) to factory settings?

Press and hold the physical Reset button on the Actiontec GT704WG (Wireless N150 4-Port ADSL2+ Gateway) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.