Verified Manufacturer Hub
MikroTik Router Login & Default Passwords
Default credentials and WinBox connection guide for MikroTik RouterBOARD and hAP series.
Username
admin Password Leave blank
MikroTik models
Select any model below to view technical specs, port configuration, and setup guide
🔍
Showing all 35 devices
| Hardware Model | Username | Password | Actions |
|---|---|---|---|
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| MikroTik cAP ax (Cap-ax) Wi-Fi | admin | Empty (no password) | |
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | Empty (no password) | ||
| admin | (blank) / printed on sticker | ||
| admin | (blank) / printed on sticker | ||
| admin | (blank) | ||
| admin | (blank) | ||
| admin | (blank) | ||
| admin | |||
| admin | |||
| admin | |||
| admin | |||
| admin | |||
| admin | No password (blank) or on device sticker | ||
| admin | Printed on Device Sticker | ||
| admin | Printed on Device Sticker | ||
| admin | Printed on Device Sticker |
How to log in to your MikroTik router
- 1 Connect PC to Ether2 (LAN) port.
- 2 Open http://192.168.88.1 or connect via WinBox application.
- 3 Login with username: admin, password: (blank).
🔄 How to Hard Reset MikroTik Router to Factory Defaults
If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your MikroTik router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: admin / Pass: (blank)).
