What is the default username and password for Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway?

The default username is "admin" and the default password is "admin".

Aethra Enterprise Core N/A (Wired Gateway) Carrier Gigabit VDSL2/SHDSL Multi-Service Gateway

Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway

Q: What is the default IP address for Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway?

The factory default IP address for Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway is http://192.168.1.1.

Q: How do I factory reset the Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway?

Locate the small Reset pinhole on the back panel of the Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Telecommunications enterprise customers requiring converged voice, data, and legacy PBX trunking

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

SV Series

Manufacturer	Aethra
Product Series	SV Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Carrier Gigabit VDSL2/SHDSL Multi-Service Gateway
Ethernet & Fiber Ports	1x VDSL2/ADSL2+, 4x GbE LAN, 4x FXS Voice, 1x ISDN PRI
Routing / Firewall Throughput	1000 Mbps Layer 3 Forwarding
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Aethra AOS Enterprise Firmware

How to log in to your Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway

1 Connect Your Device: Plug your PC into any LAN port on the Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway support?

The Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway is equipped with 1x VDSL2/ADSL2+, 4x GbE LAN, 4x FXS Voice, 1x ISDN PRI with an overall speed rating of Carrier Gigabit VDSL2/SHDSL Multi-Service Gateway.

How do I reset my Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway to factory settings?

Press and hold the physical Reset button on the Aethra Aethra SV3000 Enterprise Multi-Service Access Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.