What is the default username and password for Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router)?

The default username is "manager" and the default password is "friend".

Allied Telesis SMB Router N/A (Wired Gateway) 750 Mbps UTM Throughput

Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router)

Q: What is the default IP address for Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router)?

The factory default IP address for Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router) is http://192.168.1.1.

Q: How do I factory reset the Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router)?

Locate the small Reset pinhole on the back panel of the Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

AlliedWare Plus enterprise operating system with advanced routing

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

manager

Factory Password

friend

Technical specifications

Allied Telesis SMB Router

Manufacturer	Allied Telesis
Product Series	Allied Telesis SMB Router
Device Class / Category	SMB Router
Wireless Standard	N/A (Wired Gateway)
Speed Rating	750 Mbps UTM Throughput
Ethernet & Fiber Ports	2x 1G SFP/RJ45 combo, 8x 1G LAN, 1x USB
Routing / Firewall Throughput	750 Mbps UTM Throughput Routing
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Allied Telesis Firmware

How to log in to your Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router)

1 Connect Your Device: Plug your PC into any LAN port on the Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "manager" and password "friend", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Allied Telesis models

Allied Telesis AT-AR4050S

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router)?

The default IP address is http://192.168.1.1, default username is "manager", and default password is "friend".

What ports and speeds does Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router) support?

The Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router) is equipped with 2x 1G SFP/RJ45 combo, 8x 1G LAN, 1x USB with an overall speed rating of 750 Mbps UTM Throughput.

How do I reset my Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router) to factory settings?

Press and hold the physical Reset button on the Allied Telesis AT-AR3050S (Next-Generation Enterprise Security Router) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.