What is the default username and password for ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router?

The default username is "admin" and the default password is "admin".

How do I factory reset the ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router?

Locate the small Reset pinhole on the back panel of the ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

ALLNET SMB Router N/A (Wired Gateway) G.fast Gigabit Modem Router

ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router

Q: What is the default IP address for ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router?

The factory default IP address for ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router is http://192.168.1.1.

Ultra-broadband FTTB copper building entry, delivering gigabit speeds over copper telephone lines

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

ALL-BM Series

Manufacturer	ALLNET
Product Series	ALL-BM Series
Device Class / Category	SMB Router
Wireless Standard	N/A (Wired Gateway)
Speed Rating	G.fast Gigabit Modem Router
Ethernet & Fiber Ports	1x DSL RJ11 (G.fast 106/212 MHz / VDSL2 35b), 1x 2.5 GbE LAN, 1x GbE LAN
Routing / Firewall Throughput	Up to 1 Gbps G.fast / 300 Mbps VDSL2 35b
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	ALLNET High-Speed Modem OS

How to log in to your ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router

1 Connect Your Device: Plug your PC into any LAN port on the ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related ALLNET models

ALLNET ALL-BM200VDSL2V VDSL2 Bonding Bridge Router

SMB Router 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router support?

The ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router is equipped with 1x DSL RJ11 (G.fast 106/212 MHz / VDSL2 35b), 1x 2.5 GbE LAN, 1x GbE LAN with an overall speed rating of G.fast Gigabit Modem Router.

How do I reset my ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router to factory settings?

Press and hold the physical Reset button on the ALLNET ALLNET ALL-BM300 G.fast & Supervectoring Bridge Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.