What is the default username and password for B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router?

The default username is "root" and the default password is "root".

B+B SmartWorx 4G/5G Cellular Wi-Fi 4 (802.11n) LTE Cat 4 Industrial Gateway

B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router

Q: What is the default IP address for B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router?

The factory default IP address for B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router is http://192.168.1.1.

Q: How do I factory reset the B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router?

Locate the small Reset pinhole on the back panel of the B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Smart cities, water utility pumps, solar farms, and remote industrial asset monitoring

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

root

Factory Password

root

Technical specifications

SmartFlex Series

Manufacturer	B+B SmartWorx
Product Series	SmartFlex Series
Device Class / Category	4G/5G Cellular
Wireless Standard	Wi-Fi 4 (802.11n)
Speed Rating	LTE Cat 4 Industrial Gateway
Ethernet & Fiber Ports	2x Fast Ethernet RJ45, 1x RS-232 Serial, 2x SIM Slots, 1x USB
Routing / Firewall Throughput	150 Mbps LTE / 150 Mbps Wi-Fi
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	SmartFlex Linux Router OS

How to log in to your B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router

1 Connect Your Device: Plug your PC into any LAN port on the B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "root" and password "root", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router?

The default IP address is http://192.168.1.1, default username is "root", and default password is "root".

What ports and speeds does B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router support?

The B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router is equipped with 2x Fast Ethernet RJ45, 1x RS-232 Serial, 2x SIM Slots, 1x USB with an overall speed rating of LTE Cat 4 Industrial Gateway.

How do I reset my B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router to factory settings?

Press and hold the physical Reset button on the B+B SmartWorx B+B SmartWorx SmartFlex LTE Industrial Edge Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.