What is the default IP address for Cisco Meraki Go Router Firewall (GX20)?

The factory default IP address for Cisco Meraki Go Router Firewall (GX20) is http://192.168.1.1.

What is the default username and password for Cisco Meraki Go Router Firewall (GX20)?

The default username is "admin" and the default password is "Meraki Go App".

How do I factory reset the Cisco Meraki Go Router Firewall (GX20)?

Locate the small Reset pinhole on the back panel of the Cisco Meraki Go Router Firewall (GX20). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Cisco SMB Router N/A (Wired Gateway) App-Managed Security Gateway

Cisco Meraki Go Router Firewall (GX20)

Micro businesses and cafes managed entirely through mobile phone app

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

Meraki Go App

Technical specifications

Meraki Go

Manufacturer	Cisco
Product Series	Meraki Go
Device Class / Category	SMB Router
Wireless Standard	N/A (Wired Gateway)
Speed Rating	App-Managed Security Gateway
Ethernet & Fiber Ports	1x 1G WAN, 4x 1G LAN (1x PoE Port)
Routing / Firewall Throughput	250 Mbps Stateful Routing
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Meraki Go OS

How to log in to your Cisco Meraki Go Router Firewall (GX20)

1 Connect Your Device: Plug your PC into any LAN port on the Cisco Meraki Go Router Firewall (GX20) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Meraki Go App", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Cisco models

Catalyst 8300 (C8300-1N1S-4T2X)

Enterprise Core 192.168.1.1

Catalyst 8200 (C8200-1N-4T)

SMB Router 192.168.1.1

ISR 1100 (C1111-8P)

SMB Router 192.168.1.1

ISR 4331 (ISR4331/K9)

Enterprise Core 192.168.1.1

Meraki MX68

SMB Router 192.168.1.1

Meraki MX85

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Cisco Meraki Go Router Firewall (GX20)?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "Meraki Go App".

What ports and speeds does Cisco Meraki Go Router Firewall (GX20) support?

The Cisco Meraki Go Router Firewall (GX20) is equipped with 1x 1G WAN, 4x 1G LAN (1x PoE Port) with an overall speed rating of App-Managed Security Gateway.

How do I reset my Cisco Meraki Go Router Firewall (GX20) to factory settings?

Press and hold the physical Reset button on the Cisco Meraki Go Router Firewall (GX20) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.