What is the default username and password for Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node?

The default username is "admin" and the default password is "Printed on router label".

Community Fibre Mesh Wi-Fi 6 (802.11ax) AX4200 Tri-Band Mesh Node

Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node

Q: What is the default IP address for Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node?

The factory default IP address for Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node is http://192.168.1.1.

Q: How do I factory reset the Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node?

Locate the small Reset pinhole on the back panel of the Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

London multi-floor properties eliminating Wi-Fi dead zones in gardens and basements

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

Printed on router label

Technical specifications

Community Fibre Series

Manufacturer	Community Fibre
Product Series	Community Fibre Series
Device Class / Category	Mesh
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	AX4200 Tri-Band Mesh Node
Ethernet & Fiber Ports	1x GbE WAN/LAN, 3x GbE LAN, 1x USB 3.0
Routing / Firewall Throughput	2402 Mbps (5GHz) + 1201 Mbps (5GHz) + 574 Mbps (2.4GHz)
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Linksys Velop OS

How to log in to your Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node

1 Connect Your Device: Plug your PC into any LAN port on the Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Printed on router label", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Community Fibre models

Community Fibre Linksys SPNFX56 Tri-Band Wi-Fi 6 Mesh Router

Home Wi-Fi 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "Printed on router label".

What ports and speeds does Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node support?

The Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node is equipped with 1x GbE WAN/LAN, 3x GbE LAN, 1x USB 3.0 with an overall speed rating of AX4200 Tri-Band Mesh Node.

How do I reset my Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node to factory settings?

Press and hold the physical Reset button on the Community Fibre Community Fibre Linksys Velop Pro Wi-Fi 6 Mesh Add-On Node for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.