What is the default username and password for Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router?

The default username is "admin" and the default password is "admin".

How do I factory reset the Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router?

Locate the small Reset pinhole on the back panel of the Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Dark Hardware Home Wi-Fi Wi-Fi 4 (802.11n) N300 Wall-Plug Router / Repeater

Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router

Q: What is the default IP address for Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router?

The factory default IP address for Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router is http://192.168.10.1.

Wall-plug Wi-Fi extension, travel hotel connectivity, and home dead-zone elimination

Open http://192.168.10.1 ↗

Illustration, not a product photo

Gateway IP

192.168.10.1

Factory Username

admin

Factory Password

admin

Technical specifications

RangeMAX Series

Manufacturer	Dark Hardware
Product Series	RangeMAX Series
Device Class / Category	Home Wi-Fi
Wireless Standard	Wi-Fi 4 (802.11n)
Speed Rating	N300 Wall-Plug Router / Repeater
Ethernet & Fiber Ports	1x Fast Ethernet RJ45 WAN/LAN
Routing / Firewall Throughput	300 Mbps
Default Gateway URL	http://192.168.10.1 ↗
Operating System / Firmware	Dark RangeMAX Firmware

How to log in to your Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router

1 Connect Your Device: Plug your PC into any LAN port on the Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.10.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router?

The default IP address is http://192.168.10.1, default username is "admin", and default password is "admin".

What ports and speeds does Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router support?

The Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router is equipped with 1x Fast Ethernet RJ45 WAN/LAN with an overall speed rating of N300 Wall-Plug Router / Repeater.

How do I reset my Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router to factory settings?

Press and hold the physical Reset button on the Dark Hardware Dark RangeMAX WR300 Wireless-N Repeater Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.