What is the default username and password for Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router?

The default username is "admin" and the default password is "admin".

Datacom Enterprise Core N/A (Wired Gateway) Carrier-Grade Multi-Gigabit Enterprise

Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router

Q: What is the default IP address for Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router?

The factory default IP address for Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router is http://192.168.1.1.

Q: How do I factory reset the Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router?

Locate the small Reset pinhole on the back panel of the Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Latin American enterprise headquarters, internet service providers (ISPs), telecom backhaul

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

DM2000 Series

Manufacturer	Datacom
Product Series	DM2000 Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Carrier-Grade Multi-Gigabit Enterprise
Ethernet & Fiber Ports	4x GbE Combo (SFP/RJ45), 4x 10 GbE SFP+ Uplinks, 1x Console RS-232
Routing / Firewall Throughput	Wire-Speed Carrier Routing / High-Throughput MPLS
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Datacom DmOS Network Operating System

How to log in to your Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router

1 Connect Your Device: Plug your PC into any LAN port on the Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Datacom models

Datacom DM2300 Metro Ethernet Carrier Access Router

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router support?

The Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router is equipped with 4x GbE Combo (SFP/RJ45), 4x 10 GbE SFP+ Uplinks, 1x Console RS-232 with an overall speed rating of Carrier-Grade Multi-Gigabit Enterprise.

How do I reset my Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router to factory settings?

Press and hold the physical Reset button on the Datacom Datacom DM2100 Multi-Gigabit Enterprise Service Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.