What is the default IP address for Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN)?

The factory default IP address for Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN) is http://192.168.1.1.

What is the default username and password for Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN)?

The default username is "admin" and the default password is "admin".

How do I factory reset the Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN)?

Locate the small Reset pinhole on the back panel of the Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Digisol FTTH ONT N/A (Wired Gateway) Gigabit XPON ONU

Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN)

Bridge and routing mode GPON/EPON terminal for regional Indian ISPs

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Digisol FTTH ONT

Manufacturer	Digisol
Product Series	Digisol FTTH ONT
Device Class / Category	FTTH ONT
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Gigabit XPON ONU
Ethernet & Fiber Ports	1x SC/UPC XPON, 1x Gigabit RJ45
Routing / Firewall Throughput	Gigabit XPON ONU Capacity
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Digisol Firmware

How to log in to your Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN)

1 Connect Your Device: Plug your PC into any LAN port on the Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Digisol models

Digisol DG-GR1321

FTTH ONT 192.168.1.1

DG-HR3400

Home Wi-Fi 192.168.2.1

DG-GR1310 (XPON 1GE + 1FE + Wi-Fi ONT with Voice)

FTTH ONT 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN)?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN) support?

The Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN) is equipped with 1x SC/UPC XPON, 1x Gigabit RJ45 with an overall speed rating of Gigabit XPON ONU.

How do I reset my Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN) to factory settings?

Press and hold the physical Reset button on the Digisol DG-GR1010 (XPON 1GE ONU Terminal with Gigabit LAN) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.