What is the default username and password for Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router?

The default username is "admin" and the default password is "admin".

Edgecore Enterprise Core N/A (Wired Gateway) Enterprise 48-Port Gigabit + 4x 10G SFP+

Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router

Q: What is the default IP address for Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router?

The factory default IP address for Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router is http://192.168.1.1.

Q: How do I factory reset the Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router?

Locate the small Reset pinhole on the back panel of the Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Open networking data center top-of-rack and corporate campus core aggregation

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

AS Series

Manufacturer	Edgecore
Product Series	AS Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Enterprise 48-Port Gigabit + 4x 10G SFP+
Ethernet & Fiber Ports	48x GbE RJ45, 4x 10GbE SFP+, 2x 20G Stacking Ports
Routing / Firewall Throughput	176 Gbps Switching Fabric
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Open Network Linux (ONL) / Edgecore Enterprise OS

How to log in to your Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router

1 Connect Your Device: Plug your PC into any LAN port on the Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Edgecore models

Edgecore AS7712-32X 100GbE Open Networking Data Center Core

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router support?

The Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router is equipped with 48x GbE RJ45, 4x 10GbE SFP+, 2x 20G Stacking Ports with an overall speed rating of Enterprise 48-Port Gigabit + 4x 10G SFP+.

How do I reset my Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router to factory settings?

Press and hold the physical Reset button on the Edgecore Edgecore AS4610-54T 48-Port Gigabit Enterprise Core Switch Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.