What is the default IP address for EnGenius FitController (Fitcon100)?

The factory default IP address for EnGenius FitController (Fitcon100) is http://192.168.1.250.

What is the default username and password for EnGenius FitController (Fitcon100)?

The default username is "admin" and the default password is "admin".

How do I factory reset the EnGenius FitController (Fitcon100)?

Locate the small Reset pinhole on the back panel of the EnGenius FitController (Fitcon100). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

EnGenius SMB Router N/A (Wired Gateway) Gigabit Hardware Appliance

EnGenius FitController (Fitcon100)

Centralized on-premise multi-tenant Wi-Fi access point controller for boutique hotels and offices

Open http://192.168.1.250 ↗

Illustration, not a product photo

Gateway IP

192.168.1.250

Factory Username

admin

Factory Password

admin

Technical specifications

Fit Managed Controller

Manufacturer	EnGenius
Product Series	Fit Managed Controller
Device Class / Category	SMB Router
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Gigabit Hardware Appliance
Ethernet & Fiber Ports	1x 1G PoE-In (802.3af), 1x 1G LAN, MicroSD Slot, USB
Routing / Firewall Throughput	1 Gbps Line-Rate Management
Default Gateway URL	http://192.168.1.250 ↗
Operating System / Firmware	EnGenius FitX OS

How to log in to your EnGenius FitController (Fitcon100)

1 Connect Your Device: Plug your PC into any LAN port on the EnGenius FitController (Fitcon100) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.250 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related EnGenius models

EnGenius ECW230

SMB Router 192.168.1.1

ESG510 (Cloud Managed Security Gateway with Dual-WAN)

SMB Router 192.168.1.1

ESG610 (Multi-Gigabit SD-WAN Enterprise Security Gateway)

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for EnGenius FitController (Fitcon100)?

The default IP address is http://192.168.1.250, default username is "admin", and default password is "admin".

What ports and speeds does EnGenius FitController (Fitcon100) support?

The EnGenius FitController (Fitcon100) is equipped with 1x 1G PoE-In (802.3af), 1x 1G LAN, MicroSD Slot, USB with an overall speed rating of Gigabit Hardware Appliance.

How do I reset my EnGenius FitController (Fitcon100) to factory settings?

Press and hold the physical Reset button on the EnGenius FitController (Fitcon100) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.