What is the default IP address for Gennum Gennum Enterprise Core Pro Gateway?

The factory default IP address for Gennum Gennum Enterprise Core Pro Gateway is http://192.168.1.1.

What is the default username and password for Gennum Gennum Enterprise Core Pro Gateway?

The default username is "admin" and the default password is "admin".

How do I factory reset the Gennum Gennum Enterprise Core Pro Gateway?

Locate the small Reset pinhole on the back panel of the Gennum Gennum Enterprise Core Pro Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Gennum Enterprise Core N/A (Wired Gateway)

Gennum Gennum Enterprise Core Pro Gateway

High-reliability networking silicon network routing and device connectivity.

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Gennum Hardware

Manufacturer	Gennum
Product Series	Gennum Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Gigabit Class
Ethernet & Fiber Ports	1x GbE WAN, 4x GbE LAN
Routing / Firewall Throughput	1000 Mbps
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Gennum Firmware

How to log in to your Gennum Gennum Enterprise Core Pro Gateway

1 Connect Your Device: Plug your PC into any LAN port on the Gennum Gennum Enterprise Core Pro Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Gennum models

Gennum Gigabit Multi-Service Router

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Gennum Gennum Enterprise Core Pro Gateway?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Gennum Gennum Enterprise Core Pro Gateway support?

The Gennum Gennum Enterprise Core Pro Gateway is equipped with 1x GbE WAN, 4x GbE LAN with an overall speed rating of Gigabit Class.

How do I reset my Gennum Gennum Enterprise Core Pro Gateway to factory settings?

Press and hold the physical Reset button on the Gennum Gennum Enterprise Core Pro Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.