What is the default IP address for GL.iNet Spitz AX (GL-X3000)?

The factory default IP address for GL.iNet Spitz AX (GL-X3000) is http://192.168.8.1.

What is the default username and password for GL.iNet Spitz AX (GL-X3000)?

The default username is "root" and the default password is "Set during setup".

How do I factory reset the GL.iNet Spitz AX (GL-X3000)?

Locate the small Reset pinhole on the back panel of the GL.iNet Spitz AX (GL-X3000). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

GL.iNet 4G/5G Cellular Wi-Fi 6 (802.11ax) AX3000 5G NR Router

GL.iNet Spitz AX (GL-X3000)

RVs, remote cabins, off-grid backup internet with dual SIM failover

Open http://192.168.8.1 ↗

Illustration, not a product photo

Gateway IP

192.168.8.1

Factory Username

root

Factory Password

Set during setup

Technical specifications

Spitz 5G Series

Manufacturer	GL.iNet
Product Series	Spitz 5G Series
Device Class / Category	4G/5G Cellular
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	AX3000 5G NR Router
Ethernet & Fiber Ports	1x 2.5G WAN/LAN, 1x 1G LAN, Dual SIM Slots, 6 Antennas
Routing / Firewall Throughput	2.5 Gbps 5G Cellular
Default Gateway URL	http://192.168.8.1 ↗
Operating System / Firmware	OpenWrt / GL.iNet OS

How to log in to your GL.iNet Spitz AX (GL-X3000)

1 Connect Your Device: Plug your PC into any LAN port on the GL.iNet Spitz AX (GL-X3000) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.8.1 into the address bar.
3 Enter Factory Credentials: Enter username "root" and password "Set during setup", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related GL.iNet models

Flint 2 (GL-MT6000)

Home Wi-Fi 192.168.8.1

Flint (GL-AX1800)

Home Wi-Fi 192.168.8.1

Beryl AX (GL-MT3000)

Travel 192.168.8.1

Slate AX (GL-AXT1800)

Travel 192.168.8.1

Puli AX (GL-XE3000)

4G/5G Cellular 192.168.8.1

Brume 2 (GL-MT2500)

Prosumer Gateway 192.168.8.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for GL.iNet Spitz AX (GL-X3000)?

The default IP address is http://192.168.8.1, default username is "root", and default password is "Set during setup".

What ports and speeds does GL.iNet Spitz AX (GL-X3000) support?

The GL.iNet Spitz AX (GL-X3000) is equipped with 1x 2.5G WAN/LAN, 1x 1G LAN, Dual SIM Slots, 6 Antennas with an overall speed rating of AX3000 5G NR Router.

How do I reset my GL.iNet Spitz AX (GL-X3000) to factory settings?

Press and hold the physical Reset button on the GL.iNet Spitz AX (GL-X3000) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.