What is the default username and password for Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router?

The default username is "admin" and the default password is "private".

Hirschmann Enterprise Core N/A (Wired Gateway) Industrial Gigabit Security Appliance

Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router

Q: What is the default IP address for Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router?

The factory default IP address for Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router is http://192.168.1.1.

Q: How do I factory reset the Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router?

Locate the small Reset pinhole on the back panel of the Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Plant-wide network segmentation, industrial perimeter firewall, multi-zone security

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

private

Technical specifications

EAGLE Series

Manufacturer	Hirschmann
Product Series	EAGLE Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Industrial Gigabit Security Appliance
Ethernet & Fiber Ports	Up to 8x 10/100/1000 Mbps RJ45 or SFP Combo Ports
Routing / Firewall Throughput	Wire-Speed Gigabit Stateful Firewall Throughput
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Hirschmann HiSecOS

How to log in to your Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router

1 Connect Your Device: Plug your PC into any LAN port on the Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "private", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Hirschmann models

Hirschmann EAGLE20 Industrial Firewall Router

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "private".

What ports and speeds does Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router support?

The Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router is equipped with Up to 8x 10/100/1000 Mbps RJ45 or SFP Combo Ports with an overall speed rating of Industrial Gigabit Security Appliance.

How do I reset my Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router to factory settings?

Press and hold the physical Reset button on the Hirschmann Hirschmann EAGLE30 Multiport Industrial Security Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.