What is the default username and password for Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router?

The default username is "admin" and the default password is "adminpassword".

How do I factory reset the Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router?

Locate the small Reset pinhole on the back panel of the Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Hunsn Prosumer Gateway N/A (Wired Gateway) Quad 2.5GbE Fanless Network Security Appliance

Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router

Q: What is the default IP address for Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router?

The factory default IP address for Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router is http://192.168.1.1.

Enterprise branch office edge defense, network segmentation, and high-speed multi-gig routing

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

adminpassword

Technical specifications

RJ Series

Manufacturer	Hunsn
Product Series	RJ Series
Device Class / Category	Prosumer Gateway
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Quad 2.5GbE Fanless Network Security Appliance
Ethernet & Fiber Ports	4x 2.5GbE Intel i226-V RJ45, 2x USB 3.0, 1x HDMI, 1x DP, 1x Type-C
Routing / Firewall Throughput	2500 Mbps Wire-Speed Routing
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Intel x86 Platform (pfSense, OPNsense, VyOS, OpenWrt)

How to log in to your Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router

1 Connect Your Device: Plug your PC into any LAN port on the Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "adminpassword", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "adminpassword".

What ports and speeds does Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router support?

The Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router is equipped with 4x 2.5GbE Intel i226-V RJ45, 2x USB 3.0, 1x HDMI, 1x DP, 1x Type-C with an overall speed rating of Quad 2.5GbE Fanless Network Security Appliance.

How do I reset my Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router to factory settings?

Press and hold the physical Reset button on the Hunsn Hunsn RJ01 Fanless 4-Port 2.5GbE Intel Firewall Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.