What is the default IP address for Keenetic Keenetic Hopper (KN-3810)?

The factory default IP address for Keenetic Keenetic Hopper (KN-3810) is http://192.168.1.1.

What is the default username and password for Keenetic Keenetic Hopper (KN-3810)?

The default username is "admin" and the default password is "Set during setup".

How do I factory reset the Keenetic Keenetic Hopper (KN-3810)?

Locate the small Reset pinhole on the back panel of the Keenetic Keenetic Hopper (KN-3810). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Keenetic Home Wi-Fi Wi-Fi 6 (802.11ax) AX1800 Dual-Band Gigabit Wi-Fi 6 Router

Keenetic Keenetic Hopper (KN-3810)

SFP optical fiber uplink with Wi-Fi 6 and USB 3.0 torrent/media server

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

Set during setup

Technical specifications

Keenetic Hopper Series

Manufacturer	Keenetic
Product Series	Keenetic Hopper Series
Device Class / Category	Home Wi-Fi
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	AX1800 Dual-Band Gigabit Wi-Fi 6 Router
Ethernet & Fiber Ports	1x 1G SFP Fiber Port, 4x 1G RJ45 LAN/WAN, 1x USB 3.0
Routing / Firewall Throughput	940 Mbps Line Rate
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	KeeneticOS v4

How to log in to your Keenetic Keenetic Hopper (KN-3810)

1 Connect Your Device: Plug your PC into any LAN port on the Keenetic Keenetic Hopper (KN-3810) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Set during setup", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Keenetic models

Keenetic Titan (KN-1811)

Home Wi-Fi 192.168.1.1

Keenetic Hero 4G+ (KN-2311)

4G/5G Cellular 192.168.1.1

Keenetic Skipper (KN-1910)

Home Wi-Fi 192.168.1.1

Keenetic Speedster (KN-3010)

Home Wi-Fi 192.168.1.1

Keenetic Peak (KN-2710)

Home Wi-Fi 192.168.1.1

Hero KN-1011

Home Wi-Fi 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Keenetic Keenetic Hopper (KN-3810)?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "Set during setup".

What ports and speeds does Keenetic Keenetic Hopper (KN-3810) support?

The Keenetic Keenetic Hopper (KN-3810) is equipped with 1x 1G SFP Fiber Port, 4x 1G RJ45 LAN/WAN, 1x USB 3.0 with an overall speed rating of AX1800 Dual-Band Gigabit Wi-Fi 6 Router.

How do I reset my Keenetic Keenetic Hopper (KN-3810) to factory settings?

Press and hold the physical Reset button on the Keenetic Keenetic Hopper (KN-3810) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.