KuWFi KuWFi 4G LTE CPE High-Power Outdoor/Indoor Cellular Router
Rural broadband, RV campers, construction trailers, CCTV camera wireless backhaul
Technical specifications
CPE Series| Manufacturer | KuWFi |
|---|---|
| Product Series | CPE Series |
| Device Class / Category | 4G/5G Cellular |
| Wireless Standard | Wi-Fi 4 (802.11n) |
| Speed Rating | LTE Cat 4 N300 Cellular |
| Ethernet & Fiber Ports | 1x 10/100 Mbps WAN/LAN, 2x 10/100 Mbps LAN, 1x SIM Slot, 4x SMA Antennas |
| Routing / Firewall Throughput | 150 Mbps LTE Downlink / 300 Mbps Wi-Fi |
| Default Gateway URL | http://192.168.188.1 ↗ |
| Operating System / Firmware | KuWFi Cellular Firmware |
How to log in to your KuWFi KuWFi 4G LTE CPE High-Power Outdoor/Indoor Cellular Router
- 1 Connect Your Device: Plug your PC into any LAN port on the KuWFi KuWFi 4G LTE CPE High-Power Outdoor/Indoor Cellular Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
-
2
Navigate to Gateway IP: Launch your web browser and enter
http://192.168.188.1into the address bar. - 3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
- 4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.
