What is the default IP address for Linksys Velop AX4200 (MX4200)?

The factory default IP address for Linksys Velop AX4200 (MX4200) is http://192.168.1.1.

What is the default username and password for Linksys Velop AX4200 (MX4200)?

The default username is "admin" and the default password is "admin".

How do I factory reset the Linksys Velop AX4200 (MX4200)?

Locate the small Reset pinhole on the back panel of the Linksys Velop AX4200 (MX4200). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Linksys Mesh Wi-Fi 6 (802.11ax) AX4200 Tri-Band 8-Stream Mesh

Linksys Velop AX4200 (MX4200)

Tri-band whole home mesh with USB 3.0 port and HomeKit router support

Open http://192.168.1.1 ↗

Image: icecat.biz

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Velop Wi-Fi 6 Mesh

Manufacturer	Linksys
Product Series	Velop Wi-Fi 6 Mesh
Device Class / Category	Mesh
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	AX4200 Tri-Band 8-Stream Mesh
Ethernet & Fiber Ports	1x 1G WAN, 3x 1G LAN, 1x USB 3.0 per node
Routing / Firewall Throughput	940 Mbps Line Rate
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Intelligent Mesh OS

How to log in to your Linksys Velop AX4200 (MX4200)

1 Connect Your Device: Plug your PC into any LAN port on the Linksys Velop AX4200 (MX4200) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Linksys Velop AX4200 (MX4200)?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Linksys Velop AX4200 (MX4200) support?

The Linksys Velop AX4200 (MX4200) is equipped with 1x 1G WAN, 3x 1G LAN, 1x USB 3.0 per node with an overall speed rating of AX4200 Tri-Band 8-Stream Mesh.

How do I reset my Linksys Velop AX4200 (MX4200) to factory settings?

Press and hold the physical Reset button on the Linksys Velop AX4200 (MX4200) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.