What is the default username and password for MB Connect Line MB connect line mbNET Industrial Remote Access Router?

The default username is "admin" and the default password is "admin".

MB Connect Line SMB Router N/A (Wired Gateway) Industrial Multi-Port Secure VPN Gateway

MB Connect Line MB connect line mbNET Industrial Remote Access Router

Q: What is the default IP address for MB Connect Line MB connect line mbNET Industrial Remote Access Router?

The factory default IP address for MB Connect Line MB connect line mbNET Industrial Remote Access Router is http://192.168.0.100.

Q: How do I factory reset the MB Connect Line MB connect line mbNET Industrial Remote Access Router?

Locate the small Reset pinhole on the back panel of the MB Connect Line MB connect line mbNET Industrial Remote Access Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Industrial machine engineering, remote PLC diagnostic telemetry, and SCADA connectivity

Open http://192.168.0.100 ↗

Illustration, not a product photo

Gateway IP

192.168.0.100

Factory Username

admin

Factory Password

admin

Technical specifications

mbNET Series

Manufacturer	MB Connect Line
Product Series	mbNET Series
Device Class / Category	SMB Router
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Industrial Multi-Port Secure VPN Gateway
Ethernet & Fiber Ports	1x Fast Ethernet WAN, 4x Fast Ethernet LAN, 1x RS-232/485 Serial, 1x USB
Routing / Firewall Throughput	100 Mbps
Default Gateway URL	http://192.168.0.100 ↗
Operating System / Firmware	mbConnect24 OS

How to log in to your MB Connect Line MB connect line mbNET Industrial Remote Access Router

1 Connect Your Device: Plug your PC into any LAN port on the MB Connect Line MB connect line mbNET Industrial Remote Access Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.0.100 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for MB Connect Line MB connect line mbNET Industrial Remote Access Router?

The default IP address is http://192.168.0.100, default username is "admin", and default password is "admin".

What ports and speeds does MB Connect Line MB connect line mbNET Industrial Remote Access Router support?

The MB Connect Line MB connect line mbNET Industrial Remote Access Router is equipped with 1x Fast Ethernet WAN, 4x Fast Ethernet LAN, 1x RS-232/485 Serial, 1x USB with an overall speed rating of Industrial Multi-Port Secure VPN Gateway.

How do I reset my MB Connect Line MB connect line mbNET Industrial Remote Access Router to factory settings?

Press and hold the physical Reset button on the MB Connect Line MB connect line mbNET Industrial Remote Access Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.