What is the default username and password for Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router?

The default username is "admin" and the default password is "password".

Milesight 4G/5G Cellular Wi-Fi 4 (802.11n) Industrial Cat 4 LTE Dual-SIM Gateway

Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router

Q: What is the default IP address for Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router?

The factory default IP address for Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router is http://192.168.1.1.

Q: How do I factory reset the Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router?

Locate the small Reset pinhole on the back panel of the Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Smart cities, industrial automation, ATM kiosks, EV charging stations, and SCADA

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

password

Technical specifications

UR Series

Manufacturer	Milesight
Product Series	UR Series
Device Class / Category	4G/5G Cellular
Wireless Standard	Wi-Fi 4 (802.11n)
Speed Rating	Industrial Cat 4 LTE Dual-SIM Gateway
Ethernet & Fiber Ports	2x 10/100M Ethernet (PoE PSE), 2x SIM Slots, 1x RS232/RS485 Serial, 1x DI/DO
Routing / Firewall Throughput	150 Mbps LTE / 150 Mbps Wi-Fi
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Milesight DeviceHub OS (Python Supported)

How to log in to your Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router

1 Connect Your Device: Plug your PC into any LAN port on the Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "password", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Milesight models

Milesight UR75 Industrial High-Speed 5G Edge Computing Gateway

4G/5G Cellular 192.168.1.1

Milesight UG65 Semi-Industrial 8-Channel LoRaWAN IoT Gateway

SMB Router 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "password".

What ports and speeds does Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router support?

The Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router is equipped with 2x 10/100M Ethernet (PoE PSE), 2x SIM Slots, 1x RS232/RS485 Serial, 1x DI/DO with an overall speed rating of Industrial Cat 4 LTE Dual-SIM Gateway.

How do I reset my Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router to factory settings?

Press and hold the physical Reset button on the Milesight Milesight UR32 Industrial Dual-SIM 4G LTE IoT Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.