What is the default username and password for MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway?

The default username is "admin" and the default password is "admin".

MultiTech Enterprise Core Wi-Fi 4 (802.11n) LoRaWAN & Cellular Edge Gateway

MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway

Q: What is the default IP address for MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway?

The factory default IP address for MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway is http://192.168.2.1.

Q: How do I factory reset the MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway?

Locate the small Reset pinhole on the back panel of the MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Smart city environmental monitoring, agricultural soil sensing, campus LoRaWAN networks

Open http://192.168.2.1 ↗

Illustration, not a product photo

Gateway IP

192.168.2.1

Factory Username

admin

Factory Password

admin

Technical specifications

Conduit Series

Manufacturer	MultiTech
Product Series	Conduit Series
Device Class / Category	Enterprise Core
Wireless Standard	Wi-Fi 4 (802.11n)
Speed Rating	LoRaWAN & Cellular Edge Gateway
Ethernet & Fiber Ports	1x GbE Ethernet, 2x MultiTech mCard Accessory Bays, 1x Micro-SIM, USB
Routing / Firewall Throughput	Gigabit LAN & Long-Range LoRaWAN Wireless
Default Gateway URL	http://192.168.2.1 ↗
Operating System / Firmware	MultiTech AEP Embedded Linux with Node-RED

How to log in to your MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway

1 Connect Your Device: Plug your PC into any LAN port on the MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.2.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related MultiTech models

MultiTech MultiConnect rCell 100 Series 4G LTE Cellular Router

4G/5G Cellular 192.168.2.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway?

The default IP address is http://192.168.2.1, default username is "admin", and default password is "admin".

What ports and speeds does MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway support?

The MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway is equipped with 1x GbE Ethernet, 2x MultiTech mCard Accessory Bays, 1x Micro-SIM, USB with an overall speed rating of LoRaWAN & Cellular Edge Gateway.

How do I reset my MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway to factory settings?

Press and hold the physical Reset button on the MultiTech MultiTech MultiConnect Conduit IoT Programmable Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.