What is the default IP address for NEC (Aterm) NEC Aterm WX11000T12?

The factory default IP address for NEC (Aterm) NEC Aterm WX11000T12 is http://192.168.10.1.

What is the default username and password for NEC (Aterm) NEC Aterm WX11000T12?

The default username is "admin" and the default password is "Set during setup".

How do I factory reset the NEC (Aterm) NEC Aterm WX11000T12?

Locate the small Reset pinhole on the back panel of the NEC (Aterm) NEC Aterm WX11000T12. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

NEC (Aterm) Home Wi-Fi Wi-Fi 7 (802.11be) BE19000 12-Stream 10Gbps Flagship Router

NEC (Aterm) NEC Aterm WX11000T12

Japan 10G optical broadband (NURO Hikari 10G, NTT FLET'S Hikari Cross), ultra-low latency

Open http://192.168.10.1 ↗

Illustration, not a product photo

Gateway IP

192.168.10.1

Factory Username

admin

Factory Password

Set during setup

Technical specifications

Aterm Wi-Fi 7 Series

Manufacturer	NEC (Aterm)
Product Series	Aterm Wi-Fi 7 Series
Device Class / Category	Home Wi-Fi
Wireless Standard	Wi-Fi 7 (802.11be)
Speed Rating	BE19000 12-Stream 10Gbps Flagship Router
Ethernet & Fiber Ports	1x 10G Multi-Gigabit WAN, 1x 10G Multi-Gigabit LAN, 3x 1G LAN
Routing / Firewall Throughput	10 Gbps Wire-Speed Line Rate
Default Gateway URL	http://192.168.10.1 ↗
Operating System / Firmware	NEC Aterm OS

How to log in to your NEC (Aterm) NEC Aterm WX11000T12

1 Connect Your Device: Plug your PC into any LAN port on the NEC (Aterm) NEC Aterm WX11000T12 using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.10.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Set during setup", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related NEC (Aterm) models

NEC Aterm WX7800T8

Home Wi-Fi 192.168.10.1

WX11000T12

Home Wi-Fi 192.168.10.1

NEC Aterm WX5400HP Wi-Fi 6 OFDMA High-Power Wireless Router

Home Wi-Fi 192.168.10.1

NEC Aterm WX11000T12 Tri-Band Wi-Fi 6E 10-Gigabit Wireless Router

Home Wi-Fi 192.168.10.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for NEC (Aterm) NEC Aterm WX11000T12?

The default IP address is http://192.168.10.1, default username is "admin", and default password is "Set during setup".

What ports and speeds does NEC (Aterm) NEC Aterm WX11000T12 support?

The NEC (Aterm) NEC Aterm WX11000T12 is equipped with 1x 10G Multi-Gigabit WAN, 1x 10G Multi-Gigabit LAN, 3x 1G LAN with an overall speed rating of BE19000 12-Stream 10Gbps Flagship Router.

How do I reset my NEC (Aterm) NEC Aterm WX11000T12 to factory settings?

Press and hold the physical Reset button on the NEC (Aterm) NEC Aterm WX11000T12 for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.