What is the default IP address for NetComm NetComm NF20MESH?

The factory default IP address for NetComm NetComm NF20MESH is http://192.168.20.1.

What is the default username and password for NetComm NetComm NF20MESH?

The default username is "admin" and the default password is "Printed on label".

How do I factory reset the NetComm NetComm NF20MESH?

Locate the small Reset pinhole on the back panel of the NetComm NetComm NF20MESH. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

NetComm Modem Gateway Wi-Fi 6 (802.11ax) AX5400 VDSL2/FTTN/FTTP Gigabit Gateway

NetComm NetComm NF20MESH

Primary Australian NBN gateway supplied by Aussie Broadband, Tangerine, and Superloop

Open http://192.168.20.1 ↗

Illustration, not a product photo

Gateway IP

192.168.20.1

Factory Username

admin

Factory Password

Printed on label

Technical specifications

CloudMesh Series

Manufacturer	NetComm
Product Series	CloudMesh Series
Device Class / Category	Modem Gateway
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	AX5400 VDSL2/FTTN/FTTP Gigabit Gateway
Ethernet & Fiber Ports	1x RJ11 DSL Port, 1x 1G WAN Port, 4x 1G LAN, 2x FXS Phone Lines, 1x USB 3.0
Routing / Firewall Throughput	940 Mbps Line Rate
Default Gateway URL	http://192.168.20.1 ↗
Operating System / Firmware	NetComm CloudMesh OS

How to log in to your NetComm NetComm NF20MESH

1 Connect Your Device: Plug your PC into any LAN port on the NetComm NetComm NF20MESH using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.20.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Printed on label", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related NetComm models

Netcomm NF18ACV AC1600 Gigabit VDSL2/ADSL2+ VoIP Gateway

Modem Gateway 192.168.20.1

Netcomm NF20MESH Wi-Fi 6 Dual-Band Gigabit Gateway

Modem Gateway 192.168.20.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for NetComm NetComm NF20MESH?

The default IP address is http://192.168.20.1, default username is "admin", and default password is "Printed on label".

What ports and speeds does NetComm NetComm NF20MESH support?

The NetComm NetComm NF20MESH is equipped with 1x RJ11 DSL Port, 1x 1G WAN Port, 4x 1G LAN, 2x FXS Phone Lines, 1x USB 3.0 with an overall speed rating of AX5400 VDSL2/FTTN/FTTP Gigabit Gateway.

How do I reset my NetComm NetComm NF20MESH to factory settings?

Press and hold the physical Reset button on the NetComm NetComm NF20MESH for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.