What is the default username and password for PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router?

The default username is "root" and the default password is "opnsense".

PC Engines Prosumer Gateway N/A (Wired Gateway) Gigabit Low-Power x86 Appliance

PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router

Q: What is the default IP address for PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router?

The factory default IP address for PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router is http://192.168.1.1.

Q: How do I factory reset the PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router?

Locate the small Reset pinhole on the back panel of the PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Open-source firewall appliances, network laboratories, and low-power edge gateways

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

root

Factory Password

opnsense

Technical specifications

APU Series

Manufacturer	PC Engines
Product Series	APU Series
Device Class / Category	Prosumer Gateway
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Gigabit Low-Power x86 Appliance
Ethernet & Fiber Ports	3x GbE Intel i211AT RJ45, 1x Serial DB9, 2x USB 3.0
Routing / Firewall Throughput	1000 Mbps Wire-Speed Routing
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Open-Source Coreboot BIOS (OPNsense / pfSense / OpenWrt / OpenBSD)

How to log in to your PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router

1 Connect Your Device: Plug your PC into any LAN port on the PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "root" and password "opnsense", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related PC Engines models

PC Engines APU4 AMD Embedded Quad-Port x86 Security Router

Prosumer Gateway 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router?

The default IP address is http://192.168.1.1, default username is "root", and default password is "opnsense".

What ports and speeds does PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router support?

The PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router is equipped with 3x GbE Intel i211AT RJ45, 1x Serial DB9, 2x USB 3.0 with an overall speed rating of Gigabit Low-Power x86 Appliance.

How do I reset my PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router to factory settings?

Press and hold the physical Reset button on the PC Engines PC Engines APU2 x86 Embedded Multi-Port Network Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.