What is the default username and password for Perle Systems Perle IRG5140 LTE Enterprise Cellular Router?

The default username is "admin" and the default password is "superuser".

How do I factory reset the Perle Systems Perle IRG5140 LTE Enterprise Cellular Router?

Locate the small Reset pinhole on the back panel of the Perle Systems Perle IRG5140 LTE Enterprise Cellular Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Perle Systems 4G/5G Cellular N/A (Wired Gateway) LTE Cat 4 Enterprise Gateway

Perle Systems Perle IRG5140 LTE Enterprise Cellular Router

Q: What is the default IP address for Perle Systems Perle IRG5140 LTE Enterprise Cellular Router?

The factory default IP address for Perle Systems Perle IRG5140 LTE Enterprise Cellular Router is http://192.168.0.1.

Retail chain store failover, smart digital signage, bank branch continuity

Open http://192.168.0.1 ↗

Illustration, not a product photo

Gateway IP

192.168.0.1

Factory Username

admin

Factory Password

superuser

Technical specifications

IRG5140 Series

Manufacturer	Perle Systems
Product Series	IRG5140 Series
Device Class / Category	4G/5G Cellular
Wireless Standard	N/A (Wired Gateway)
Speed Rating	LTE Cat 4 Enterprise Gateway
Ethernet & Fiber Ports	4x GbE RJ45 Ports, 2x SIM Slots, 1x RS-232 Console
Routing / Firewall Throughput	150 Mbps LTE / Gigabit Wire-Speed Routing
Default Gateway URL	http://192.168.0.1 ↗
Operating System / Firmware	Perle OS

How to log in to your Perle Systems Perle IRG5140 LTE Enterprise Cellular Router

1 Connect Your Device: Plug your PC into any LAN port on the Perle Systems Perle IRG5140 LTE Enterprise Cellular Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.0.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "superuser", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Perle Systems models

Perle IRG5500 5G Industrial Cellular Edge Router

4G/5G Cellular 192.168.0.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Perle Systems Perle IRG5140 LTE Enterprise Cellular Router?

The default IP address is http://192.168.0.1, default username is "admin", and default password is "superuser".

What ports and speeds does Perle Systems Perle IRG5140 LTE Enterprise Cellular Router support?

The Perle Systems Perle IRG5140 LTE Enterprise Cellular Router is equipped with 4x GbE RJ45 Ports, 2x SIM Slots, 1x RS-232 Console with an overall speed rating of LTE Cat 4 Enterprise Gateway.

How do I reset my Perle Systems Perle IRG5140 LTE Enterprise Cellular Router to factory settings?

Press and hold the physical Reset button on the Perle Systems Perle IRG5140 LTE Enterprise Cellular Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.