What is the default username and password for Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router?

The default username is "admin" and the default password is "mguard".

Phoenix Contact Enterprise Core N/A (Wired Gateway) Industrial Security Appliance

Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router

Q: What is the default IP address for Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router?

The factory default IP address for Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router is http://192.168.1.1.

Q: How do I factory reset the Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router?

Locate the small Reset pinhole on the back panel of the Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Automotive assembly lines, robotics cells, OT cyber security network segmentation

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

mguard

Technical specifications

FL MGUARD

Manufacturer	Phoenix Contact
Product Series	FL MGUARD
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Industrial Security Appliance
Ethernet & Fiber Ports	2x 10/100 Mbps RJ45, 1x SD Memory Card Slot
Routing / Firewall Throughput	100 Mbps Wire-Speed Stateful Filtering / 40 Mbps IPsec
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Phoenix Contact mGuard OS

How to log in to your Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router

1 Connect Your Device: Plug your PC into any LAN port on the Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "mguard", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Phoenix Contact models

Phoenix Contact FL ROUTER 3002T Industrial Cellular Router

4G/5G Cellular 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "mguard".

What ports and speeds does Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router support?

The Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router is equipped with 2x 10/100 Mbps RJ45, 1x SD Memory Card Slot with an overall speed rating of Industrial Security Appliance.

How do I reset my Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router to factory settings?

Press and hold the physical Reset button on the Phoenix Contact Phoenix Contact FL MGUARD RS4000 Industrial Security Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.