Pirelli Broadband Solutions Modem Gateway Wi-Fi 6 (802.11ax)

Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router

Q: What is the default IP address for Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router?

The factory default IP address for Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router is http://192.168.1.1.

Q: What is the default username and password for Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router?

The default username is "admin" and the default password is "Printed on router base".

Q: How do I factory reset the Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router?

Locate the small Reset pinhole on the back panel of the Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Robust multi-WAN failover, VLAN segmentation, and Italy regional network architecture.

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

Printed on router base

Technical specifications

Pirelli Broadband Solutions Hardware

Manufacturer	Pirelli Broadband Solutions
Product Series	Pirelli Broadband Solutions Series
Device Class / Category	Modem Gateway
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	Gigabit Class
Ethernet & Fiber Ports	2x GbE WAN/LAN, 4x GbE LAN
Routing / Firewall Throughput	1200 Mbps
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Pirelli Broadband Solutions Firmware

How to log in to your Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router

1 Connect Your Device: Plug your PC into any LAN port on the Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Printed on router base", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "Printed on router base".

What ports and speeds does Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router support?

The Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router is equipped with 2x GbE WAN/LAN, 4x GbE LAN with an overall speed rating of Gigabit Class.

How do I reset my Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router to factory settings?

Press and hold the physical Reset button on the Pirelli Broadband Solutions Pirelli Broadband Solutions Gigabit Multi-Service Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.