What is the default IP address for Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node?

The factory default IP address for Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node is http://192.168.1.1.

What is the default username and password for Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node?

The default username is "plumeadmin" and the default password is "plume123".

How do I factory reset the Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node?

Locate the small Reset pinhole on the back panel of the Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Plume Mesh Wi-Fi 6 (802.11ax)

Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node

AI-driven adaptive mesh optimization, smart home cybersecurity, and whole-home Wi-Fi.

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

plumeadmin

Factory Password

plume123

Technical specifications

Plume Hardware

Manufacturer	Plume
Product Series	Plume Series
Device Class / Category	Mesh
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	Gigabit Class
Ethernet & Fiber Ports	1x 2.5GbE LAN/WAN, 1x GbE LAN
Routing / Firewall Throughput	3000 Mbps
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Plume Firmware

How to log in to your Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node

1 Connect Your Device: Plug your PC into any LAN port on the Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "plumeadmin" and password "plume123", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Plume models

Plume PowerPod Smart Tri-Band Mesh Pod

Mesh 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node?

The default IP address is http://192.168.1.1, default username is "plumeadmin", and default password is "plume123".

What ports and speeds does Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node support?

The Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node is equipped with 1x 2.5GbE LAN/WAN, 1x GbE LAN with an overall speed rating of Gigabit Class.

How do I reset my Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node to factory settings?

Press and hold the physical Reset button on the Plume Plume SuperPod Wi-Fi 6 Adaptive Mesh Node for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.