What is the default username and password for Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge?

The default username is "admin" and the default password is "public".

Proxim Wireless Enterprise Core N/A (Point-to-Point Wireless)

Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge

Q: What is the default IP address for Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge?

The factory default IP address for Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge is http://169.254.128.132.

Q: How do I factory reset the Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge?

Locate the small Reset pinhole on the back panel of the Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Long-distance high-bandwidth campus wireless interconnects and wireless backhaul.

Open http://169.254.128.132 ↗

Illustration, not a product photo

Gateway IP

169.254.128.132

Factory Username

admin

Factory Password

public

Technical specifications

Proxim Wireless Hardware

Manufacturer	Proxim Wireless
Product Series	Proxim Wireless Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Point-to-Point Wireless)
Speed Rating	Gigabit Class
Ethernet & Fiber Ports	2x Gigabit Ethernet PoE Out/In Ports
Routing / Firewall Throughput	100 Mbps
Default Gateway URL	http://169.254.128.132 ↗
Operating System / Firmware	Proxim Wireless Firmware

How to log in to your Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge

1 Connect Your Device: Plug your PC into any LAN port on the Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://169.254.128.132 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "public", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Proxim Wireless models

Proxim ORiNOCO AP-9100 Enterprise Router Gateway

SMB Router 169.254.128.132

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge?

The default IP address is http://169.254.128.132, default username is "admin", and default password is "public".

What ports and speeds does Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge support?

The Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge is equipped with 2x Gigabit Ethernet PoE Out/In Ports with an overall speed rating of Gigabit Class.

How do I reset my Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge to factory settings?

Press and hold the physical Reset button on the Proxim Wireless Proxim Tsunami QB-820 Point-to-Point Wireless Bridge for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.