What is the default username and password for RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router?

The default username is "admin" and the default password is "1234".

RAD Data Communications Enterprise Core N/A (Wired Gateway) Multiport Industrial Security Core

RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router

Q: What is the default IP address for RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router?

The factory default IP address for RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router is http://192.168.1.1.

Q: How do I factory reset the RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router?

Locate the small Reset pinhole on the back panel of the RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Critical infrastructure cyber security perimeter, utility backbone communication

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

1234

Technical specifications

SecFlow Series

Manufacturer	RAD Data Communications
Product Series	SecFlow Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Multiport Industrial Security Core
Ethernet & Fiber Ports	Up to 16x GbE SFP/RJ45 Ports, Modular Power Supplies
Routing / Firewall Throughput	Wire-Speed Switching and Encrypted Routing
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	RAD SecFlow OS

How to log in to your RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router

1 Connect Your Device: Plug your PC into any LAN port on the RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "1234", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related RAD Data Communications models

RAD SecFlow-1v Rugged Industrial IoT Security Gateway

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "1234".

What ports and speeds does RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router support?

The RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router is equipped with Up to 16x GbE SFP/RJ45 Ports, Modular Power Supplies with an overall speed rating of Multiport Industrial Security Core.

How do I reset my RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router to factory settings?

Press and hold the physical Reset button on the RAD Data Communications RAD SecFlow-2 Modular Industrial Ethernet Security Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.