RouterSync.com
Ruijie logo Ruijie SMB Router N/A (Wired Gateway) Gigabit Multi-WAN Cloud Security Gateway

Ruijie Reyee RG-EG210G-E

Hotels, schools, corporate offices needing smart flow control and cloud captive portal

RUIJIE
Illustration, not a product photo
Gateway IP
Factory Username
admin
Factory Password
admin

Technical specifications

Reyee Enterprise Gateway
Manufacturer Ruijie
Product Series Reyee Enterprise Gateway
Device Class / Category SMB Router
Wireless Standard N/A (Wired Gateway)
Speed Rating Gigabit Multi-WAN Cloud Security Gateway
Ethernet & Fiber Ports 10x 1G RJ45 (Up to 4x WAN, 9x LAN)
Routing / Firewall Throughput 1 Gbps Line Rate Throughput
Default Gateway URL http://192.168.110.1 ↗
Operating System / Firmware ReyeeOS Enterprise

How to log in to your Ruijie Reyee RG-EG210G-E

  1. 1 Connect Your Device: Plug your PC into any LAN port on the Ruijie Reyee RG-EG210G-E using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
  2. 2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.110.1 into the address bar.
  3. 3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
  4. 4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Ruijie models

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

Frequently asked questions

What is the default login for Ruijie Reyee RG-EG210G-E?

The default IP address is http://192.168.110.1, default username is "admin", and default password is "admin".

What ports and speeds does Ruijie Reyee RG-EG210G-E support?

The Ruijie Reyee RG-EG210G-E is equipped with 10x 1G RJ45 (Up to 4x WAN, 9x LAN) with an overall speed rating of Gigabit Multi-WAN Cloud Security Gateway.

How do I reset my Ruijie Reyee RG-EG210G-E to factory settings?

Press and hold the physical Reset button on the Ruijie Reyee RG-EG210G-E for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.