What is the default IP address for Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway?

The factory default IP address for Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway is http://192.168.1.1.

What is the default username and password for Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway?

The default username is "admin" and the default password is "admin".

How do I factory reset the Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway?

Locate the small Reset pinhole on the back panel of the Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Sercomm Modem Gateway Wi-Fi 4 (802.11n) N300 VDSL2 VoIP Gateway

Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway

Carrier-grade budget residential VDSL2 and IP telephony deployment across Southern Europe

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Speedport Series

Manufacturer	Sercomm
Product Series	Speedport Series
Device Class / Category	Modem Gateway
Wireless Standard	Wi-Fi 4 (802.11n)
Speed Rating	N300 VDSL2 VoIP Gateway
Ethernet & Fiber Ports	1x VDSL RJ11, 4x Fast Ethernet LAN, 2x FXS Voice Ports
Routing / Firewall Throughput	100 Mbps VDSL2 / 300 Mbps Wi-Fi
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Sercomm Speedport Firmware

How to log in to your Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway

1 Connect Your Device: Plug your PC into any LAN port on the Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Sercomm models

FG824CD (GPON Wi-Fi 6 Optical Network Gateway)

FTTH ONT 192.168.1.1

Sercomm DM814 VDSL2/ADSL2+ Wireless Broadband Gateway

Modem Gateway 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway support?

The Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway is equipped with 1x VDSL RJ11, 4x Fast Ethernet LAN, 2x FXS Voice Ports with an overall speed rating of N300 VDSL2 VoIP Gateway.

How do I reset my Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway to factory settings?

Press and hold the physical Reset button on the Sercomm Sercomm Speedport Entry 2 VDSL2 Telecom Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.