What is the default IP address for Silicom Silicom Cordoba Edge uCPE Network Appliance?

The factory default IP address for Silicom Silicom Cordoba Edge uCPE Network Appliance is http://192.168.1.1.

What is the default username and password for Silicom Silicom Cordoba Edge uCPE Network Appliance?

The default username is "admin" and the default password is "admin".

How do I factory reset the Silicom Silicom Cordoba Edge uCPE Network Appliance?

Locate the small Reset pinhole on the back panel of the Silicom Silicom Cordoba Edge uCPE Network Appliance. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Silicom SD-WAN N/A (Wired Gateway) Multi-Gigabit Universal CPE Edge Gateway

Silicom Silicom Cordoba Edge uCPE Network Appliance

Carrier universal customer premises equipment (uCPE), virtualized routing, and SD-WAN VNFs

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Cordoba Series

Manufacturer	Silicom
Product Series	Cordoba Series
Device Class / Category	SD-WAN
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Multi-Gigabit Universal CPE Edge Gateway
Ethernet & Fiber Ports	4x 10GbE SFP+, 8x GbE RJ45, 1x IPMI, 2x SIM Slots
Routing / Firewall Throughput	40 Gbps Switching Capacity
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Silicom Whitebox Platform (Linux/BSD/KVM)

How to log in to your Silicom Silicom Cordoba Edge uCPE Network Appliance

1 Connect Your Device: Plug your PC into any LAN port on the Silicom Silicom Cordoba Edge uCPE Network Appliance using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Silicom Silicom Cordoba Edge uCPE Network Appliance?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Silicom Silicom Cordoba Edge uCPE Network Appliance support?

The Silicom Silicom Cordoba Edge uCPE Network Appliance is equipped with 4x 10GbE SFP+, 8x GbE RJ45, 1x IPMI, 2x SIM Slots with an overall speed rating of Multi-Gigabit Universal CPE Edge Gateway.

How do I reset my Silicom Silicom Cordoba Edge uCPE Network Appliance to factory settings?

Press and hold the physical Reset button on the Silicom Silicom Cordoba Edge uCPE Network Appliance for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.