What is the default username and password for Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router?

The default username is "admin" and the default password is "admin".

Sino-Telecom Enterprise Core N/A (Wired Gateway) 10G Carrier Optical OLT Aggregation Router

Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router

Q: What is the default IP address for Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router?

The factory default IP address for Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router is http://192.168.1.100.

Q: How do I factory reset the Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router?

Locate the small Reset pinhole on the back panel of the Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Carrier fiber-to-the-home (FTTH) access networks, campus optical distribution, and enterprise WAN

Open http://192.168.1.100 ↗

Illustration, not a product photo

Gateway IP

192.168.1.100

Factory Username

admin

Factory Password

admin

Technical specifications

SAN Series

Manufacturer	Sino-Telecom
Product Series	SAN Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	10G Carrier Optical OLT Aggregation Router
Ethernet & Fiber Ports	8x 10G/Gigabit PON Ports, 4x 10GbE SFP+ Uplinks, 4x GbE RJ45
Routing / Firewall Throughput	128 Gbps Switching Capacity
Default Gateway URL	http://192.168.1.100 ↗
Operating System / Firmware	Sino-Telecom Carrier PON OS

How to log in to your Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router

1 Connect Your Device: Plug your PC into any LAN port on the Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.100 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router?

The default IP address is http://192.168.1.100, default username is "admin", and default password is "admin".

What ports and speeds does Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router support?

The Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router is equipped with 8x 10G/Gigabit PON Ports, 4x 10GbE SFP+ Uplinks, 4x GbE RJ45 with an overall speed rating of 10G Carrier Optical OLT Aggregation Router.

How do I reset my Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router to factory settings?

Press and hold the physical Reset button on the Sino-Telecom Sino-Telecom SAN3700 10G EPON/GPON OLT Access Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.