What is the default username and password for Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance?

The default username is "admin" and the default password is "admin".

Stormshield SMB Router N/A (Wired Gateway) Multi-Gigabit UTM Security Gateway

Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance

Q: What is the default IP address for Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance?

The factory default IP address for Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance is http://192.168.1.254.

Q: How do I factory reset the Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance?

Locate the small Reset pinhole on the back panel of the Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

European corporate branch offices, sensitive medical networks, and critical government infrastructure

Open http://192.168.1.254 ↗

Illustration, not a product photo

Gateway IP

192.168.1.254

Factory Username

admin

Factory Password

admin

Technical specifications

SN Series

Manufacturer	Stormshield
Product Series	SN Series
Device Class / Category	SMB Router
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Multi-Gigabit UTM Security Gateway
Ethernet & Fiber Ports	8x GbE RJ45 Ports, 1x USB 3.0, 1x Console
Routing / Firewall Throughput	2 Gbps Firewall / 400 Mbps IPSec VPN
Default Gateway URL	http://192.168.1.254 ↗
Operating System / Firmware	Stormshield Network Security (SNS)

How to log in to your Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance

1 Connect Your Device: Plug your PC into any LAN port on the Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.254 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Stormshield models

Stormshield SN160 UTM Security Appliance

SMB Router 192.168.1.254

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance?

The default IP address is http://192.168.1.254, default username is "admin", and default password is "admin".

What ports and speeds does Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance support?

The Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance is equipped with 8x GbE RJ45 Ports, 1x USB 3.0, 1x Console with an overall speed rating of Multi-Gigabit UTM Security Gateway.

How do I reset my Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance to factory settings?

Press and hold the physical Reset button on the Stormshield Stormshield SN210 Next-Gen Security Gateway Appliance for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.