What is the default username and password for Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System?

The default username is "admin" and the default password is "admin".

How do I factory reset the Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System?

Locate the small Reset pinhole on the back panel of the Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Strong Mesh Wi-Fi 5 (802.11ac) AC1200 Gigabit Whole-Home Mesh System

Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System

Q: What is the default IP address for Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System?

The factory default IP address for Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System is http://192.168.1.1.

European residential homes, multi-story apartments, and dead-zone elimination

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Atria Series

Manufacturer	Strong
Product Series	Atria Series
Device Class / Category	Mesh
Wireless Standard	Wi-Fi 5 (802.11ac)
Speed Rating	AC1200 Gigabit Whole-Home Mesh System
Ethernet & Fiber Ports	2x GbE LAN/WAN Auto-Sensing
Routing / Firewall Throughput	867 Mbps (5GHz) + 300 Mbps (2.4GHz)
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Strong Mesh OS

How to log in to your Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System

1 Connect Your Device: Plug your PC into any LAN port on the Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Strong models

Strong 4G LTE Router 300 SIM Cellular Home Gateway

4G/5G Cellular 192.168.1.1

Strong Router AX3000 Dual-Band Gigabit Wi-Fi 6 Gateway

Home Wi-Fi 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System support?

The Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System is equipped with 2x GbE LAN/WAN Auto-Sensing with an overall speed rating of AC1200 Gigabit Whole-Home Mesh System.

How do I reset my Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System to factory settings?

Press and hold the physical Reset button on the Strong Strong Atria Wi-Fi Mesh 1200 Whole Home Gigabit System for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.