What is the default IP address for SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway?

The factory default IP address for SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway is http://192.168.1.1.

What is the default username and password for SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway?

The default username is "admin" and the default password is "admin".

How do I factory reset the SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway?

Locate the small Reset pinhole on the back panel of the SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

SunDenshi 4G/5G Cellular N/A (Wired Gateway) LTE Cat 1 Low-Power IoT

SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway

Smart water meters, parking payment terminals, environmental sensors across Japan

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Rooster Series

Manufacturer	SunDenshi
Product Series	Rooster Series
Device Class / Category	4G/5G Cellular
Wireless Standard	N/A (Wired Gateway)
Speed Rating	LTE Cat 1 Low-Power IoT
Ethernet & Fiber Ports	1x 10/100 Mbps RJ45, 1x RS-232C D-Sub 9, 1x SIM Slot
Routing / Firewall Throughput	10 Mbps LTE Cat 1 IoT Connectivity
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	SunDenshi Embedded Firmware

How to log in to your SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway

1 Connect Your Device: Plug your PC into any LAN port on the SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related SunDenshi models

SunDenshi Rooster RX230 Industrial LTE Gateway

4G/5G Cellular 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway support?

The SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway is equipped with 1x 10/100 Mbps RJ45, 1x RS-232C D-Sub 9, 1x SIM Slot with an overall speed rating of LTE Cat 1 Low-Power IoT.

How do I reset my SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway to factory settings?

Press and hold the physical Reset button on the SunDenshi SunDenshi Rooster AX220 M2M IoT Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.