What is the default username and password for Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal?

The default username is "admin" and the default password is "adminpassword".

How do I factory reset the Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal?

Locate the small Reset pinhole on the back panel of the Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Tarana SMB Router N/A (Point-to-Point Wireless) G1 Gigabit Wireless 800 Mbps

Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal

Q: What is the default IP address for Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal?

The factory default IP address for Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal is http://192.168.1.1.

Next-generation non-line-of-sight (NLoS) fixed wireless residential and commercial access

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

adminpassword

Technical specifications

G1 Series

Manufacturer	Tarana
Product Series	G1 Series
Device Class / Category	SMB Router
Wireless Standard	N/A (Point-to-Point Wireless)
Speed Rating	G1 Gigabit Wireless 800 Mbps
Ethernet & Fiber Ports	1x 2.5GbE PoE Port
Routing / Firewall Throughput	800 Mbps Aggregated
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Tarana TaranaOS

How to log in to your Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal

1 Connect Your Device: Plug your PC into any LAN port on the Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "adminpassword", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Tarana models

Tarana G1 Base Node (BN) Multi-Carrier Massive MIMO Wireless Core

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "adminpassword".

What ports and speeds does Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal support?

The Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal is equipped with 1x 2.5GbE PoE Port with an overall speed rating of G1 Gigabit Wireless 800 Mbps.

How do I reset my Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal to factory settings?

Press and hold the physical Reset button on the Tarana Tarana G1 Remote Node (RN) Gigabit Wireless Terminal for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.