What is the default username and password for Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router?

The default username is "admin" and the default password is "admin".

Telco Systems Enterprise Core N/A (Wired Gateway) 10G Carrier Ethernet 2.0 Router

Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router

Q: What is the default IP address for Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router?

The factory default IP address for Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router is http://192.168.1.1.

Q: How do I factory reset the Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router?

Locate the small Reset pinhole on the back panel of the Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Metro Ethernet aggregation, high-capacity mobile 5G cell site gateway, carrier edge

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

T-Marc Series

Manufacturer	Telco Systems
Product Series	T-Marc Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	10G Carrier Ethernet 2.0 Router
Ethernet & Fiber Ports	4x 10 GbE SFP+ Uplinks, 24x GbE SFP Fiber Ports, Dual Redundant Power
Routing / Firewall Throughput	128 Gbps Non-Blocking Wire-Speed Switching Capacity
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Telco Systems BiG-NSE OS

How to log in to your Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router

1 Connect Your Device: Plug your PC into any LAN port on the Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Telco Systems models

Telco Systems T-Metro 8100 100G Metro Aggregation Router

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router support?

The Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router is equipped with 4x 10 GbE SFP+ Uplinks, 24x GbE SFP Fiber Ports, Dual Redundant Power with an overall speed rating of 10G Carrier Ethernet 2.0 Router.

How do I reset my Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router to factory settings?

Press and hold the physical Reset button on the Telco Systems Telco Systems T-Marc 3348 Multi-Service 10G Carrier Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.