What is the default username and password for Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway?

The default username is "admin" and the default password is "adminpassword".

Telrad 4G/5G Cellular N/A (Point-to-Point Wireless) Carrier LTE-A 4x4 MIMO Outdoor Base

Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway

Q: What is the default IP address for Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway?

The factory default IP address for Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway is http://192.168.1.1.

Q: How do I factory reset the Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway?

Locate the small Reset pinhole on the back panel of the Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

WISP fixed wireless deployments, rural utility telemetry, and municipal broadband in CBRS bands

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

adminpassword

Technical specifications

BreezeCOMPACT Series

Manufacturer	Telrad
Product Series	BreezeCOMPACT Series
Device Class / Category	4G/5G Cellular
Wireless Standard	N/A (Point-to-Point Wireless)
Speed Rating	Carrier LTE-A 4x4 MIMO Outdoor Base
Ethernet & Fiber Ports	2x 10GbE SFP+, 1x GbE RJ45 PoE In
Routing / Firewall Throughput	400 Mbps Aggregated
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Telrad BreezeOS

How to log in to your Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway

1 Connect Your Device: Plug your PC into any LAN port on the Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "adminpassword", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "adminpassword".

What ports and speeds does Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway support?

The Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway is equipped with 2x 10GbE SFP+, 1x GbE RJ45 PoE In with an overall speed rating of Carrier LTE-A 4x4 MIMO Outdoor Base.

How do I reset my Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway to factory settings?

Press and hold the physical Reset button on the Telrad Telrad BreezeCOMPACT 1000 4G/LTE Fixed Wireless Base Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.