What is the default IP address for Teltonika RUTX50 Industrial 5G Router?

The factory default IP address for Teltonika RUTX50 Industrial 5G Router is http://192.168.1.1.

What is the default username and password for Teltonika RUTX50 Industrial 5G Router?

The default username is "admin" and the default password is "admin01 / (Printed on sticker)".

How do I factory reset the Teltonika RUTX50 Industrial 5G Router?

Locate the small Reset pinhole on the back panel of the Teltonika RUTX50 Industrial 5G Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Teltonika 4G/5G Cellular Wi-Fi 5 (802.11ac) 3.3 Gbps 5G Industrial Gateway

Teltonika RUTX50 Industrial 5G Router

Mission-critical industrial automation, energy grid telemetry, maritime and enterprise failover

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin01 / (Printed on sticker)

Technical specifications

RUTX Industrial Cellular

Manufacturer	Teltonika
Product Series	RUTX Industrial Cellular
Device Class / Category	4G/5G Cellular
Wireless Standard	Wi-Fi 5 (802.11ac)
Speed Rating	3.3 Gbps 5G Industrial Gateway
Ethernet & Fiber Ports	5x 1G Gigabit RJ45, Dual SIM, GNSS/GPS, 4x 5G Antennas
Routing / Firewall Throughput	3.3 Gbps 5G Sub-6 / Gigabit LAN
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	RutOS (OpenWrt based)

How to log in to your Teltonika RUTX50 Industrial 5G Router

1 Connect Your Device: Plug your PC into any LAN port on the Teltonika RUTX50 Industrial 5G Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin01 / (Printed on sticker)", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Teltonika models

RUTX50

4G/5G Cellular 192.168.1.1

RUTX11

4G/5G Cellular 192.168.1.1

RUT241

4G/5G Cellular 192.168.1.1

Teltonika RUTX12

4G/5G Cellular 192.168.1.1

Teltonika TRB500

4G/5G Cellular 192.168.2.1

RUT951 (Industrial 4G LTE Cat.4 Dual SIM Router with RutOS)

4G/5G Cellular 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Teltonika RUTX50 Industrial 5G Router?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin01 / (Printed on sticker)".

What ports and speeds does Teltonika RUTX50 Industrial 5G Router support?

The Teltonika RUTX50 Industrial 5G Router is equipped with 5x 1G Gigabit RJ45, Dual SIM, GNSS/GPS, 4x 5G Antennas with an overall speed rating of 3.3 Gbps 5G Industrial Gateway.

How do I reset my Teltonika RUTX50 Industrial 5G Router to factory settings?

Press and hold the physical Reset button on the Teltonika RUTX50 Industrial 5G Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.