What is the default username and password for TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE?

The default username is "admin" and the default password is "Created on First Boot".

TP-Link Home Wi-Fi Wi-Fi 7 (802.11be) BE19000 Tri-Band Dual 10G Router

TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE

Q: What is the default IP address for TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE?

The factory default IP address for TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE is http://192.168.0.1.

Q: How do I factory reset the TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE?

Locate the small Reset pinhole on the back panel of the TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Ultra-fast 10-Gigabit fiber broadband, 8K video streaming, and future-proof home networks

Open http://192.168.0.1 ↗

Illustration, not a product photo

Gateway IP

192.168.0.1

Factory Username

admin

Factory Password

Created on First Boot

Technical specifications

Archer BE Series

Manufacturer	TP-Link
Product Series	Archer BE Series
Device Class / Category	Home Wi-Fi
Wireless Standard	Wi-Fi 7 (802.11be)
Speed Rating	BE19000 Tri-Band Dual 10G Router
Ethernet & Fiber Ports	1x 10GbE RJ45/SFP+ Combo WAN, 1x 10GbE LAN, 4x 2.5GbE LAN, 1x USB 3.0
Routing / Firewall Throughput	11520 Mbps (6GHz) + 5760 Mbps (5GHz) + 1376 Mbps (2.4GHz)
Default Gateway URL	http://192.168.0.1 ↗
Operating System / Firmware	TP-Link HomeShield OS

How to log in to your TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE

1 Connect Your Device: Plug your PC into any LAN port on the TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.0.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Created on First Boot", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related TP-Link models

Archer BE900

Home Wi-Fi 192.168.0.1

Archer BE800

Home Wi-Fi 192.168.0.1

Archer BE550

Home Wi-Fi 192.168.0.1

Archer BE230

Home Wi-Fi 192.168.0.1

Archer GE800

Gaming 192.168.0.1

Archer AXE300

Home Wi-Fi 192.168.0.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE?

The default IP address is http://192.168.0.1, default username is "admin", and default password is "Created on First Boot".

What ports and speeds does TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE support?

The TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE is equipped with 1x 10GbE RJ45/SFP+ Combo WAN, 1x 10GbE LAN, 4x 2.5GbE LAN, 1x USB 3.0 with an overall speed rating of BE19000 Tri-Band Dual 10G Router.

How do I reset my TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE to factory settings?

Press and hold the physical Reset button on the TP-Link TP-Link Archer BE800 Tri-Band Wi-Fi 7 Router with Dual 10GbE for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.