What is the default IP address for TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router)?

The factory default IP address for TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router) is http://192.168.0.1.

What is the default username and password for TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router)?

The default username is "admin" and the default password is "admin".

How do I factory reset the TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router)?

Locate the small Reset pinhole on the back panel of the TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

TP-Link Enterprise Core N/A (Wired Gateway) Gigabit Enterprise NAT

TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router)

64-bit dual-core processor and up to 4 Gigabit WAN ports

Open http://192.168.0.1 ↗

Image: icecat.biz

Gateway IP

192.168.0.1

Factory Username

admin

Factory Password

admin

Technical specifications

TP-Link Enterprise Core

Manufacturer	TP-Link
Product Series	TP-Link Enterprise Core
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Gigabit Enterprise NAT
Ethernet & Fiber Ports	1x 1G WAN, 3x 1G WAN/LAN, 1x 1G LAN
Routing / Firewall Throughput	Gigabit Enterprise NAT Capacity
Default Gateway URL	http://192.168.0.1 ↗
Operating System / Firmware	TP-Link OS

How to log in to your TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router)

1 Connect Your Device: Plug your PC into any LAN port on the TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.0.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related TP-Link models

Archer BE900

Home Wi-Fi 192.168.0.1

Archer BE800

Home Wi-Fi 192.168.0.1

Archer BE550

Home Wi-Fi 192.168.0.1

Archer BE230

Home Wi-Fi 192.168.0.1

Archer GE800

Gaming 192.168.0.1

Archer AXE300

Home Wi-Fi 192.168.0.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router)?

The default IP address is http://192.168.0.1, default username is "admin", and default password is "admin".

What ports and speeds does TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router) support?

The TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router) is equipped with 1x 1G WAN, 3x 1G WAN/LAN, 1x 1G LAN with an overall speed rating of Gigabit Enterprise NAT.

How do I reset my TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router) to factory settings?

Press and hold the physical Reset button on the TP-Link TL-ER5120 (Gigabit Multi-WAN Load Balance Router) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.