Transition Networks Enterprise Core N/A (Wired Gateway) Hardened Managed Gigabit PoE+ Router

Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router

Q: What is the default IP address for Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router?

The factory default IP address for Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router is http://192.168.1.10.

Q: What is the default username and password for Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router?

The default username is "admin" and the default password is "admin".

Q: How do I factory reset the Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router?

Locate the small Reset pinhole on the back panel of the Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Smart city surveillance cameras, intelligent traffic signaling, and outdoor security perimeters

Open http://192.168.1.10 ↗

Illustration, not a product photo

Gateway IP

192.168.1.10

Factory Username

admin

Factory Password

admin

Technical specifications

Hardened Series

Manufacturer	Transition Networks
Product Series	Hardened Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Hardened Managed Gigabit PoE+ Router
Ethernet & Fiber Ports	8x GbE PoE+ RJ45, 2x GbE SFP Slots, 1x Console
Routing / Firewall Throughput	20 Gbps Switching Capacity
Default Gateway URL	http://192.168.1.10 ↗
Operating System / Firmware	Transition Networks Enterprise Firmware

How to log in to your Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router

1 Connect Your Device: Plug your PC into any LAN port on the Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.10 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Transition Networks models

Transition Networks ION Hardened Managed Edge Switch Router

Enterprise Core 192.168.1.10

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router?

The default IP address is http://192.168.1.10, default username is "admin", and default password is "admin".

What ports and speeds does Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router support?

The Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router is equipped with 8x GbE PoE+ RJ45, 2x GbE SFP Slots, 1x Console with an overall speed rating of Hardened Managed Gigabit PoE+ Router.

How do I reset my Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router to factory settings?

Press and hold the physical Reset button on the Transition Networks Transition SISPM1040-384-LRT Managed Hardened PoE+ Switch Router for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.