What is the default username and password for TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router)?

The default username is "admin" and the default password is "admin".

How do I factory reset the TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router)?

Locate the small Reset pinhole on the back panel of the TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

TRENDnet Home Wi-Fi Wi-Fi 5 (802.11ac) AC3000 Tri-Band

TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router)

Q: What is the default IP address for TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router)?

The factory default IP address for TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router) is http://192.168.10.1.

Pre-encrypted Wi-Fi security with 3 concurrent wireless bands

Open http://192.168.10.1 ↗

Illustration, not a product photo

Gateway IP

192.168.10.1

Factory Username

admin

Factory Password

admin

Technical specifications

TRENDnet Home Wi-Fi

Manufacturer	TRENDnet
Product Series	TRENDnet Home Wi-Fi
Device Class / Category	Home Wi-Fi
Wireless Standard	Wi-Fi 5 (802.11ac)
Speed Rating	AC3000 Tri-Band
Ethernet & Fiber Ports	1x 1G WAN, 4x 1G LAN, 1x USB 3.0, 1x USB 2.0
Routing / Firewall Throughput	AC3000 Tri-Band Routing
Default Gateway URL	http://192.168.10.1 ↗
Operating System / Firmware	TRENDnet Firmware

How to log in to your TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router)

1 Connect Your Device: Plug your PC into any LAN port on the TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.10.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related TRENDnet models

TRENDnet TEW-831MDR

Mesh 192.168.10.1

TEW-921DAP (AX1800 Dual-Band PoE Wi-Fi 6 Access Point/Router)

SMB Router 192.168.10.100

TWG-431BR (Multi-WAN Gigabit VPN Router)

SMB Router 192.168.10.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router)?

The default IP address is http://192.168.10.1, default username is "admin", and default password is "admin".

What ports and speeds does TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router) support?

The TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router) is equipped with 1x 1G WAN, 4x 1G LAN, 1x USB 3.0, 1x USB 2.0 with an overall speed rating of AC3000 Tri-Band.

How do I reset my TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router) to factory settings?

Press and hold the physical Reset button on the TRENDnet TEW-829DRU (AC3000 Tri-Band Wireless Gigabit Router) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.