What is the default IP address for Ubiquiti NanoStation Loco5AC (Loco5AC)?

The factory default IP address for Ubiquiti NanoStation Loco5AC (Loco5AC) is http://192.168.1.20.

What is the default username and password for Ubiquiti NanoStation Loco5AC (Loco5AC)?

The default username is "ubnt" and the default password is "ubnt".

How do I factory reset the Ubiquiti NanoStation Loco5AC (Loco5AC)?

Locate the small Reset pinhole on the back panel of the Ubiquiti NanoStation Loco5AC (Loco5AC). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Ubiquiti Prosumer Gateway N/A (Point-to-Point Wireless) 450+ Mbps Compact Wireless Bridge

Ubiquiti NanoStation Loco5AC (Loco5AC)

Low-cost high-performance wireless bridge for outdoor security cameras and outbuildings

Open http://192.168.1.20 ↗

Illustration, not a product photo

Gateway IP

192.168.1.20

Factory Username

ubnt

Factory Password

ubnt

Technical specifications

airMAX Series

Manufacturer	Ubiquiti
Product Series	airMAX Series
Device Class / Category	Prosumer Gateway
Wireless Standard	N/A (Point-to-Point Wireless)
Speed Rating	450+ Mbps Compact Wireless Bridge
Ethernet & Fiber Ports	1x 1G GbE Port (Passive 24V PoE), Integrated 13dBi Antenna
Routing / Firewall Throughput	450+ Mbps Throughput
Default Gateway URL	http://192.168.1.20 ↗
Operating System / Firmware	airOS 8

How to log in to your Ubiquiti NanoStation Loco5AC (Loco5AC)

1 Connect Your Device: Plug your PC into any LAN port on the Ubiquiti NanoStation Loco5AC (Loco5AC) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.20 into the address bar.
3 Enter Factory Credentials: Enter username "ubnt" and password "ubnt", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Ubiquiti models

UniFi Dream Machine Pro (UDM-Pro)

Prosumer Gateway 192.168.1.1

UniFi Dream Machine Special Edition (UDM-SE)

Prosumer Gateway 192.168.1.1

UniFi Dream Wall (UDW)

Enterprise Core 192.168.1.1

UniFi Cloud Gateway Ultra (UCG-Ultra)

Prosumer Gateway 192.168.1.1

UniFi Express (UX)

Home Wi-Fi 192.168.1.1

UniFi Dream Router (UDR)

Home Wi-Fi 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Ubiquiti NanoStation Loco5AC (Loco5AC)?

The default IP address is http://192.168.1.20, default username is "ubnt", and default password is "ubnt".

What ports and speeds does Ubiquiti NanoStation Loco5AC (Loco5AC) support?

The Ubiquiti NanoStation Loco5AC (Loco5AC) is equipped with 1x 1G GbE Port (Passive 24V PoE), Integrated 13dBi Antenna with an overall speed rating of 450+ Mbps Compact Wireless Bridge.

How do I reset my Ubiquiti NanoStation Loco5AC (Loco5AC) to factory settings?

Press and hold the physical Reset button on the Ubiquiti NanoStation Loco5AC (Loco5AC) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.