What is the default username and password for UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT?

The default username is "admin" and the default password is "admin".

How do I factory reset the UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT?

Locate the small Reset pinhole on the back panel of the UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

UTStarcom FTTH ONT N/A (Wired Gateway) Gigabit GPON Optical Terminal

UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT

Q: What is the default IP address for UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT?

The factory default IP address for UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT is http://192.168.1.1.

Fiber-to-the-home subscriber termination for broadband internet and VoIP telephony

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

iAN Series

Manufacturer	UTStarcom
Product Series	iAN Series
Device Class / Category	FTTH ONT
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Gigabit GPON Optical Terminal
Ethernet & Fiber Ports	1x GPON SC/APC Optical Port, 2x GbE LAN, 1x FXS POTS Port
Routing / Firewall Throughput	2.488 Gbps Downstream / 1.244 Gbps Upstream GPON
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	UTStarcom ONT OS

How to log in to your UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT

1 Connect Your Device: Plug your PC into any LAN port on the UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related UTStarcom models

UTStarcom WA3002G4 ADSL2+ Wireless Modem Router

Modem Gateway 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT support?

The UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT is equipped with 1x GPON SC/APC Optical Port, 2x GbE LAN, 1x FXS POTS Port with an overall speed rating of Gigabit GPON Optical Terminal.

How do I reset my UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT to factory settings?

Press and hold the physical Reset button on the UTStarcom UTStarcom iAN-02EX Optical Network Terminal ONT for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.