What is the default username and password for WAGO WAGO PFC200 Telecontrol Controller Router 750-8212?

The default username is "admin" and the default password is "wago".

How do I factory reset the WAGO WAGO PFC200 Telecontrol Controller Router 750-8212?

Locate the small Reset pinhole on the back panel of the WAGO WAGO PFC200 Telecontrol Controller Router 750-8212. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

WAGO Enterprise Core N/A (Wired Gateway) Telecontrol PLC & Industrial Router

WAGO WAGO PFC200 Telecontrol Controller Router 750-8212

Q: What is the default IP address for WAGO WAGO PFC200 Telecontrol Controller Router 750-8212?

The factory default IP address for WAGO WAGO PFC200 Telecontrol Controller Router 750-8212 is http://192.168.1.17.

Smart electrical grids, telecontrol substations (IEC 60870-5-104), municipal water plants

Open http://192.168.1.17 ↗

Illustration, not a product photo

Gateway IP

192.168.1.17

Factory Username

admin

Factory Password

wago

Technical specifications

PFC200 Series

Manufacturer	WAGO
Product Series	PFC200 Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Telecontrol PLC & Industrial Router
Ethernet & Fiber Ports	2x 10/100 Mbps Configurable Ethernet, 1x RS-232/485, 1x SD Slot
Routing / Firewall Throughput	100 Mbps Line-Rate Switching & Control
Default Gateway URL	http://192.168.1.17 ↗
Operating System / Firmware	WAGO Real-Time Linux with CODESYS V3

How to log in to your WAGO WAGO PFC200 Telecontrol Controller Router 750-8212

1 Connect Your Device: Plug your PC into any LAN port on the WAGO WAGO PFC200 Telecontrol Controller Router 750-8212 using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.17 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "wago", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for WAGO WAGO PFC200 Telecontrol Controller Router 750-8212?

The default IP address is http://192.168.1.17, default username is "admin", and default password is "wago".

What ports and speeds does WAGO WAGO PFC200 Telecontrol Controller Router 750-8212 support?

The WAGO WAGO PFC200 Telecontrol Controller Router 750-8212 is equipped with 2x 10/100 Mbps Configurable Ethernet, 1x RS-232/485, 1x SD Slot with an overall speed rating of Telecontrol PLC & Industrial Router.

How do I reset my WAGO WAGO PFC200 Telecontrol Controller Router 750-8212 to factory settings?

Press and hold the physical Reset button on the WAGO WAGO PFC200 Telecontrol Controller Router 750-8212 for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.